The 8th picture where things are soldered. Look in the background. You'll see more wires with white tape. Disconnect them from the light and you will get more room. Take the tape off of them and you will find a place where you don't have to splice the wires. A place where 3 wires where joined together. One set of these wires is positive and one negative. You could attach both there or one to the positive and one to the ground, I soldered both of mine. Use your multi meter to figure out which one is positive. A hell of a lot easier. Then re-tape when you are done. No splicing or stripping=no fuss.
|