Quote:
Originally Posted by finch1750
Give me a week or two when I can get in to an alignment. I will be running OEM crash bolts with SPC camber bolts in the lower hole. I think it should net about -2 based on the 1 or 2 other people who went with this idea.
|
Quote:
Originally Posted by dwx
The "crash" lower bolts in the upper hole are not going to get you to -1.5. You will need actual camber bolts or plates for that.
|
Quote:
Originally Posted by Kostamojen
I have "actual" camber bolts now...
Trying to avoid tophats.
|
I recently installed just the OEM crash bolts in the upper slot and have -1.2* camber as a result. I realize that everyone is having different results, but with only half of that you should easily get your goal of -2 with both in my not-expert opinion.