Quote:
Originally Posted by rikixass
Resurrecting this post to ask about a roof COVER installation vs replacement. Is the cover held on by 3M adhesives?
Thanks in advance,
Rik
|
I'm assume you didn't read the whole thread as he displayed all the necessary items and procedures to do a DIY guide. Below is the list and installation video he put in this thread to answer your question.
Items you will need:
A carbon fiber roof panel.
Trim tools
10mm socket
Flat head screwdriver
Razor blade
3m body panel adhesive 08115
Center punch tool
Spot weld drill bit
Hand drill
Wire wheel attachment
Sanding disc attachment with 120grit pads
Shop vac
Fabric drop cloth
Touch up paint
8-10 hand clamps. 2-4” c-clamps or 3” vice grips will work fine
Cardboard
Lint free microfibers.
Heavy weights (small tool boxes, paint cans, actual weights)