For sale! ACL and OEM engine bearings, std size.

[Eaton PSI]

I have some leftover bearings from my last engine build. I bought a few sets of bearings so I could tune the clearances exactly how I wanted them.

ACL race series mains and big ends.
The big ends are 4x std shells and 4x 0.025mm oversize. I run the std shell in the rod and the 0.025 shell in the cap to give 0.012mm extra clearance on the big end.
The mains are a mixed bag of std size and 0.025mm undersize (although still a full set). Very handy if you've checked all your bearing clearances and there's one or 2 that need tweaking.
$100 for both sets.

OEM subaru main bearings.
New, sealed, std size main bearing set. No longer needed.
$150.
I would be happy to swap these for a 0.25mm undersize set of mains as I have a 0.25mm reground crank lying around for the next build.

Located in endeavour hills, vic 3802.