4 Point Roll Bar, Seat, Harness Installed - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

IPGJames · 10-30-2015, 03:10 PM

After some deliberation I pulled the trigger and had Mazworx weld in a 4 point roll bar.

I bought the BRZ to be used as a track car mainly. I want to be able to use my HANS as I hope to run the car quite frequently. I checked into the bolt-in roll bar and harness bar options but I just kept coming back to welding a bar in. Worked with Mazworx on many other projects and they exceeded my expectations.

Just got done fitting the interior back in last night and have it all prepped for run Daytona with NASA this weekend. Will need to pull the interior back out and have the roll bar painted after this weekend.

We just had to notch the rear side plastics and cut the rear truck fabric to wrap around the cross bar. The only interior pieces that couldn't go back in are the rear seat backs (the seat bottoms fit just fine)

All in all it came out great...still can bolt in the stock seat and use the stock seat belt but being able to run my race seat with harness and HANS will be very nice.

DaiTT500 · 10-31-2015, 11:15 AM

Nice. My car is also getting wrapped up on the half cage.

Right now he's wrapping up my seat delete aluminum panels to separate the trunk to the cabin:

Alan · 01-16-2016, 05:45 AM

How much are you guys spending for this work? Thinking about doing the same to my car.

DaiTT500 · 01-16-2016, 07:26 PM

$1200 for my roll bar.

Takumi788 · 01-16-2016, 08:54 PM

Quote:

Originally Posted by IPGJames

After some deliberation I pulled the trigger and had Mazworx weld in a 4 point roll bar.

Was this a custom one-off roll bar? I don't see one available for our chassis on their website.

IPGJames · 01-17-2016, 10:17 AM

Quote:

Originally Posted by Takumi788

Was this a custom one-off roll bar? I don't see one available for our chassis on their website.

It was custom made for my car but he did make a jig for it so in theory he can sell you your own u-weld kit...call the office and talk to Mark.

LavaLife · 02-03-2016, 03:29 PM

Quote:

Originally Posted by DaiTT500

$1200 for my roll bar.

Did you remove all the seat belts for the rear?

Can you update the pics of the finished product if possible?

Looks extremely nice!!

DaiTT500 · 02-04-2016, 12:41 AM

Quote:

Originally Posted by LavaLife

Did you remove all the seat belts for the rear?

Can you update the pics of the finished product if possible?

Looks extremely nice!!

Only pic I have at the moment.

Carlitoz3 · 02-04-2016, 01:21 AM

That looks amazing! If I lived down the block I would have set up an appointment.

LavaLife · 02-04-2016, 08:03 AM

Quote:

Originally Posted by DaiTT500

Only pic I have at the moment.

Really nice man! I'd even rock just the bare metal! Looks good tho wrapped in suede!

ka-t_240 · 02-04-2016, 11:20 AM

Can you take some pics of the fitment with the interior in? This looks like something I would like, if fits awesome and the price is right, I wouldn't mind picking up something like this. How far back is this bar from the normal seating position? Granted I am still on stock seat, but I have it back almost as far as possible, maybe 2-3 clicks foward.

10-30-2015, 03:10 PM	#1
IPGJames Banned Join Date: Aug 2015 Drives: ...Cars... Location: Lake Mary, FL Posts: 64 Thanks: 0 Thanked 49 Times in 19 Posts Mentioned: 2 Post(s) Tagged: 2 Thread(s)	4 Point Roll Bar, Seat, Harness Installed After some deliberation I pulled the trigger and had Mazworx weld in a 4 point roll bar. I bought the BRZ to be used as a track car mainly. I want to be able to use my HANS as I hope to run the car quite frequently. I checked into the bolt-in roll bar and harness bar options but I just kept coming back to welding a bar in. Worked with Mazworx on many other projects and they exceeded my expectations. Just got done fitting the interior back in last night and have it all prepped for run Daytona with NASA this weekend. Will need to pull the interior back out and have the roll bar painted after this weekend. We just had to notch the rear side plastics and cut the rear truck fabric to wrap around the cross bar. The only interior pieces that couldn't go back in are the rear seat backs (the seat bottoms fit just fine) All in all it came out great...still can bolt in the stock seat and use the stock seat belt but being able to run my race seat with harness and HANS will be very nice.

10-31-2015, 11:15 AM	#2
DaiTT500 Senior Member Join Date: Oct 2013 Drives: Posts: 190 Thanks: 21 Thanked 164 Times in 78 Posts Mentioned: 9 Post(s) Tagged: 0 Thread(s)	Nice. My car is also getting wrapped up on the half cage. Right now he's wrapping up my seat delete aluminum panels to separate the trunk to the cabin: __________________

01-16-2016, 05:45 AM	#3
Alan Senior Member Join Date: Sep 2012 Drives: 2013 SWP BRZ Ltd. / E60 M5 Location: DE Posts: 136 Thanks: 25 Thanked 76 Times in 42 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	How much are you guys spending for this work? Thinking about doing the same to my car. __________________ 2013 BRZ Limited \| SWP \| Verus Ventus 1 and High-Efficiency Rear Wing \| Invidia N1 Ti \| JR Oil Cooler \| RCE T2 \| RaceSeng Cas/Cam \| SPL LCA & TA \| Wilwood/RR Racing Stage II/Sport Performance \| XP10 \| Apex ARC-8 \| Toyo R888R \| 245/40-17 \| Sparco Ergo II/Evo II \| AIM MXP \| SmartyCam GP HD 2.2

01-16-2016, 07:26 PM	#4
DaiTT500 Senior Member Join Date: Oct 2013 Drives: Posts: 190 Thanks: 21 Thanked 164 Times in 78 Posts Mentioned: 9 Post(s) Tagged: 0 Thread(s)	$1200 for my roll bar. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Show us your Custom Roll Cage or Roll Bar and Harness Setup	Black Tire	Tracking / Autocross / HPDE / Drifting	27	02-13-2015 09:59 PM
Sold: 2x Cipher Racing Harness Set 4 Point 2 Inch and Harness Bar	siuhen	Interior Parts (Incl. Lighting)	12	12-27-2014 09:38 AM
Seat sub mount bar for 6 point harness	philooo	Tracking / Autocross / HPDE / Drifting	7	08-18-2014 11:20 PM
4 Point harness mounting locations for stock seat	raytrix	DIY (Do-It-Yourself) Guides	29	04-11-2014 10:36 PM

02-04-2016, 01:21 AM	#9
Carlitoz3 Senior Member Join Date: Apr 2013 Drives: 2013 MT Asphalt FRS Location: Baldwin Park, CA Posts: 1,051 Thanks: 237 Thanked 235 Times in 157 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	That looks amazing! If I lived down the block I would have set up an appointment.

02-04-2016, 11:20 AM	#11
ka-t_240 Senior Member Join Date: May 2014 Drives: BRZ Location: Fargo, ND Posts: 968 Thanks: 124 Thanked 327 Times in 236 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Can you take some pics of the fitment with the interior in? This looks like something I would like, if fits awesome and the price is right, I wouldn't mind picking up something like this. How far back is this bar from the normal seating position? Granted I am still on stock seat, but I have it back almost as far as possible, maybe 2-3 clicks foward.

User Name		Remember Me?
Password