Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB
Page 1 of 19 1 234511 Last »
Show 40 post(s) from this thread on one page

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Cosmetic Modification (Interior/Exterior/Lighting) (https://www.ft86club.com/forums/forumdisplay.php?f=36)
-   -   Frs Fog Lights Finally! (https://www.ft86club.com/forums/showthread.php?t=27366)

Juanito08 01-25-2013 06:47 PM
Frs Fog Lights Finally!
 
got done installing these bad boys, used a fog light harness I got from a friend + outback fog light housing + the Jdm bezel (took 3 weeks to get here)
Led builds should be here tomorrow
Parts needed :
Quote:
Originally Posted by Nikkojoe (Post 632707)
RH Fog light cover - SU00301518
http://www.amayama.com/search/?q=su00301518

LH Fog light cover - SU00301519
http://www.amayama.com/search/?q=su00301519
2 of these:
http://www.subarupartsforyou.com/cp_...p?partid=19073
http://i1102.photobucket.com/albums/...125_162821.jpg
http://i1102.photobucket.com/albums/...125_162825.jpg
http://i1102.photobucket.com/albums/...125_162834.jpg

Quote:
Originally Posted by Juanito08 (Post 691778)
Working on the DIY just been busy since the semester just started. Went to the gas station and took some pics. I think the fact that the housing is made of glass and that the bulbs are H11 gives you a better light out put. The BRZ guys are replacing there fogs with these glass ones and making there bulbs H11.

No lights at all:
http://i1102.photobucket.com/albums/...126_203645.jpg
Fogs on:
http://i1102.photobucket.com/albums/...126_203649.jpg
Fogs + HiD bulbs:
http://i1102.photobucket.com/albums/...126_203658.jpg

HID's only against wall:
http://i1102.photobucket.com/albums/...126_204035.jpg
Fogs only:
http://i1102.photobucket.com/albums/...126_203849.jpg
HID's + fogs:
http://i1102.photobucket.com/albums/...126_204118.jpg

Beyer Subaru 01-25-2013 06:49 PM
Schveet!! Congrats and god job. Thanks for sharing.

Gixxersixxerman 01-25-2013 06:52 PM
Nice.. Still can't figure out why we don't have this option commonly available here yet..

kmbkk 01-25-2013 06:58 PM
Looks great! This is definitely on my must do mod list.

Xdragonxb0i 01-25-2013 06:58 PM
you guys think the Subaru Fog light bezel will fit on the FRS?

*KID* 01-25-2013 07:04 PM
NICE!

I need this

GT86drifter 01-25-2013 07:10 PM
got these a while back =)

http://distilleryimage2.s3.amazonaws...0a1f8cf0_7.jpg

frsguy707 01-25-2013 07:12 PM
Nice

Sent from my Galaxy Nexus using Tapatalk 2

Juanito08 01-25-2013 07:32 PM
Thanks guys if anyone need help feel free to ask!

ron wright 01-25-2013 07:40 PM
was it difficult to swap out the new bezel for the old one? Did you come in from the wheel well, from under the front bumper, or did you have to go deeper?

Also, any suggestions for location for passing wiring harness through the firewall?

Thanks,

whitefrs 01-25-2013 07:42 PM
Sweet!!!

Where did u get the harness from

Hardrock4445 01-25-2013 07:48 PM
Quote:
Originally Posted by Xdragonxb0i (Post 689617)
you guys think the Subaru Fog light bezel will fit on the FRS?
No

kmbkk 01-25-2013 08:07 PM
Quick question: from where (shop, online, etc...) did you order the foglight bezels?

bebopblues 01-25-2013 08:09 PM
Are these OEM? Where did you get them from and how much where they?

Juanito08 01-25-2013 08:09 PM
Quote:
Originally Posted by ron wright (Post 689691)
was it difficult to swap out the new bezel for the old one? Did you come in from the wheel well, from under the front bumper, or did you have to go deeper?

Also, any suggestions for location for passing wiring harness through the firewall?

Thanks,
Its easy taking them out just some plastic tabs holding them in place. I came in from under the car way easier under the front bumper just remove some tabs and you should see how the dezel is held in place.

I ran the wires through the whole next to the battery (passenger side)

Juanito08 01-25-2013 08:12 PM
Quote:
Originally Posted by whitefrs (Post 689693)
Sweet!!!

Where did u get the harness from
I got it from a friend, he ordered fogs for his Mazda 3 and they sent him 2. Any H11 harness will work just fine.

Juanito08 01-25-2013 08:15 PM
Quote:
Originally Posted by kmbkk (Post 689739)
Quick question: from where (shop, online, etc...) did you order the foglight bezels?
I'll try to find the link.. each side was $15 but shipping was about $35... took 3 weeks to get here from japan
Quote:
Originally Posted by bebopblues (Post 689745)
Are these OEM? Where did you get them from and how much where they?
Not really? I had an H11 harness +Subaru outback fog light ($100 for both)+ JDM 86 bezels ($60) = Frs fogs

86 FRS 01-25-2013 08:17 PM
how about the harness that nigel sells? is that enough harness to run or u need an extension wires? and can u take a photo where did u install the switch?

or DIY would be better LOL

bebopblues 01-25-2013 08:29 PM
Quote:
Originally Posted by Juanito08 (Post 689757)
I'll try to find the link.. each side was $15 but shipping was about $35... took 3 weeks to get here from japan

Not really? I had an H11 harness +Subaru outback fog light ($100 for both)+ JDM 86 bezels ($60) = Frs fogs

- [ame="http://www.amazon.com/Headlight-Connector-Socket-Harness-Moisture/dp/B002MVNM8W/ref=pd_sxp_f_pt"]H11 harness - $7.99 x 2 = $14.98 + shipping[/ame]

- [ame="http://www.amazon.com/Subaru-Outback-Replacement-Light-Assembly/dp/B002PQJ8VY"]Subaru outback fog lights (Pair) - $49.95 + shipping[/ame]

- JDM 86 bezels - $25 x 2 = $50 + shipping

Is that all? That's about $115 + shipping total.

brianlo622 01-25-2013 08:53 PM
does this mean you have a switch inside your cockpit instead of using a stalk to turn the fog lights on?

karne 01-25-2013 08:56 PM
somebody need to do a DIY guide on this!

Juanito08 01-25-2013 09:05 PM
Quote:
Originally Posted by 86 FRS (Post 689761)
how about the harness that nigel sells? is that enough harness to run or u need an extension wires? and can u take a photo where did u install the switch?

or DIY would be better LOL
Working on a DIY Video ;)

Quote:
Originally Posted by bebopblues (Post 689787)
You can get the harness from Nigel too, wrong fogs

Quote:
Originally Posted by brianlo622 (Post 689824)
does this mean you have a switch inside your cockpit instead of using a stalk to turn the fog lights on?
Right now there wired to the parking light so that when I turn the parking lights they come on and stay on with the head lights as well.

Quote:
Originally Posted by karne (Post 689831)
somebody need to do a DIY guide on this!
Working on it ;)

Juanito08 01-25-2013 09:09 PM
Fog lights needed

2 of these

http://www.subarupartsforyou.com/cp_...p?partid=19073

86 FRS 01-25-2013 09:10 PM
Quote:
Originally Posted by Juanito08 (Post 689847)
Working on a DIY Video ;)

:thanks: I appreciate also if u list all the parts needed and link lol (sorry ii i asked to much)

the harness from nigel is enough? or u need an extension wires?

Juanito08 01-25-2013 09:17 PM
Fog light bezels prop to this member

Quote:
Originally Posted by Nikkojoe (Post 632707)
RH Fog light cover - SU00301518
http://www.amayama.com/search/?q=su00301518

LH Fog light cover - SU00301519
http://www.amayama.com/search/?q=su00301519

Juanito08 01-25-2013 09:20 PM
Quote:
Originally Posted by 86 FRS (Post 689856)
:thanks: I appreciate also if u list all the parts needed and link lol (sorry ii i asked to much)

the harness from nigel is enough? or u need an extension wires?
I wouldn't know if mine was the same as Nigels Harness but I'm sure its similar

86 FRS 01-25-2013 09:25 PM
Quote:
Originally Posted by Juanito08 (Post 689874)
I wouldn't know if mine was the same as Nigels Harness but I'm sure its similar
:thanks: i wait for your DIY and start orderng parts. i just dont know where to run those wires lol

Khánh 01-25-2013 09:59 PM
Quote:
Originally Posted by Juanito08 (Post 689868)
Fog light bezels prop to this member
thanks!! thats what need need :thumbsup:

whitefrs 01-25-2013 10:04 PM
Quote:
Originally Posted by Juanito08 (Post 689868)
Fog light bezels prop to this member
How was the fit of the bazels?

Juanito08 01-25-2013 10:19 PM
Quote:
Originally Posted by whitefrs (Post 689932)
How was the fit of the bazels?
Perfect ! Its an actual Toyota Parts. Not replicas

http://i1102.photobucket.com/albums/...125_104417.jpg

try2findmark 01-25-2013 11:08 PM
Thanks for the input! Plan on doing this mod probably after you post a DIY :]

frsguy707 01-26-2013 01:55 AM
Quote:
Originally Posted by Juanito08 (Post 689868)
Fog light bezels prop to this member
Did you have to input a bunch of info like what your buying, for what car, its also asking for a Vin etc...

Sent from my Galaxy Nexus using Tapatalk 2

Lonewolf 01-26-2013 02:23 AM
Juanito08

Do the fogs help with nighttime visibility at all?

Juanito08 01-26-2013 04:29 AM
Quote:
Originally Posted by frsguy707 (Post 690370)
Did you have to input a bunch of info like what your buying, for what car, its also asking for a Vin etc...

Sent from my Galaxy Nexus using Tapatalk 2
Yes, for the vin I just put "email for vin" I mostly filled it out as much as possible and on the description I just put the actual car info and what I needed. As long as they have a part # they are good.

http://i1102.photobucket.com/albums/...6-06-21-55.png
Quote:
Originally Posted by Lonewolf (Post 690416)
Juanito08

Do the fogs help with nighttime visibility at all?
First night with them and I can honestly say they do, you have a wider view of the road

frsguy707 01-26-2013 11:44 AM
Quote:
Originally Posted by Juanito08 (Post 690542)
Yes, for the vin I just put "email for vin" I mostly filled it out as much as possible and on the description I just put the actual car info and what I needed. As long as they have a part # they are good.

http://i1102.photobucket.com/albums/...6-06-21-55.png


First night with them and I can honestly say they do, you have a wider view of the road
I just finished filling out the form they said they will have a quite for me in one business day. Was that the same for you?

frsguy707 01-26-2013 11:57 AM
I can't wait to get started on this project :happyanim:

lbroskee 01-26-2013 12:01 PM
in theory, couldnt i wire this directly to my from parking lights so no extra switch is needed? plus i killed off my parking lights anyway so they jus work as blinkers (used single filament)

cdo221 01-26-2013 01:30 PM
Quote:
Originally Posted by lbroskee (Post 690816)
in theory, couldnt i wire this directly to my from parking lights so no extra switch is needed? plus i killed off my parking lights anyway so they jus work as blinkers (used single filament)
Yea, I think the OP mentioned in one of the replies that he just wired it to the parking lights. No extra switch.

Did you use a 7440 bulb instead of a 7443 to kill off the parking lights?

lbroskee 01-26-2013 01:33 PM
i had 7443, but 1 of the filaments died so i swapped the other working 7443 with a 7440 from the rear rather then ordering more stealth bulbs. ghetto, but u cant tell unless u remove them :thumbup:

ericvanderwoodsen 01-26-2013 04:16 PM
:coolpics: This looks way better than the people putting those led drls on frs like the brz's have, fits it just right and looks higher quality....


All times are GMT -4. The time now is 06:36 AM.
Page 1 of 19 1 234511 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.