Quote:
Originally Posted by jonghyun
MORE QUESTIONS:
1. so the dimmer IS the switch, and pwm is a TYPE of dimmer, in which case i dont actually need to get a certain type of led's?
2. if i want to install lights on driver and passenger side would using a T-tap be the best way to go?
3. where do you actually connect it to the fuse box? does the fuse box contain extra empty slots you can just hook up the wire to?
4. i dont understand what materials are needed to actually connect the wire to the Fuse box.
|
1. There are no "certain type" of leds, leds are leds, all that varies is the color and power draw (voltage/current)
2. I personally don't like t-taps, I will be doing this in a few weekends and will most likely strip the insulation off a wire, splice and solder my leads in that way, For my money its worth the time to do, better connection and no risk of corrosion.
3. Since I will be tapping directly into a wire there is no need for me to tap into the fuse box, the only difference is where you're drawing power from.
4. a fuse tap will tap plug onto the back of a fuse and draw power by making a connection that way.