Quote:
Originally Posted by sales@delicioustuning.com
No,
The MAF sensor stays attached, as the ECU still uses it to monitor other parameters. Removing the MAF, even though it is not being used to meter air, would result in the car running poorly or not at all. 
Sincerely,
Zach
Delicious Tuning |
Ok thanks. I was reading about the racerom upgrade on your web page and it stated:
The Speed Density (SD) feature changes the way the engine load is calculated. When SD mode is activated, the ECU will disregard the MAF sensor reading and will instead calculate mass airflow based on Engine Speed, Manifold Pressure and Air Temperature, this allows the MAF sensor to be removed, and a larger intake may then be fitted if desired.
I guess that as that may be an option with the software but that is not the way your tune is setup.
Thanks!
Pat