Quite a bit more work done on the car, but not many pics to post at the moment. The combination of being pretty busy, and being cold out means when I duck out to work on the car, its just to get it done ASAP.
I've half removed the rear seats and seat belts. Passenger side is done, still need to do the driver's side. Put CLD and MLV in the trunk. Haven't finished that job as the tempurature dropped about 20 degrees as I was trying to finish up. Heat gun made sure the adhesive will stick, but it was way below freezing when I called it quits.
Ordered and received the black trim pieces from Amayama. Steering wheel trim missing from the box, so sent them an email. I've installed all the other pieces minus the knee pad garnishes and door handles. Holding off until my JPM Coachworks knee pads arrive so I can install the pads, garnish, and OEM armrest all at the same time. Unsure if I'm going to install the door handles at this point.
Installed the sidemarkers I received from @
Acree. Right turn signal is working, but I screwed something up on the left side. Guessing I need to resolder it, as the parking light works just fine. Had to epoxy in some new retaining clips to get them installed, pretty easy.
@
GrimmSpeed LWCP arrived as well. Will probably wait until I order something like the Mishimoto Induction Hose to install it, since I'll want to leave the sound tube hardware out permanently if I'm going to remove it to install the LWCP.
Picking up my rear seat delete from UPS today. Have a small project in mind for that. No details just yet, lets just say some Alcantara is involved
