Quick small update for everyone.
I got a new jack ( since my other car is on my other one -_- ) this first pic shows where i think the frame is pushing up the motor. I think this part bent in and is pushing the left side of the motor up, or at least i hope.
Here you can see some frame damage and not damage, the 2 circles up top are not damaged parts, which is a good sign, it looks like everything from the subrame back is not all bent up.
The lower part is pushing the passenger side control arm back, which has got the wheel and all the steering geometry screwed up.
Heres a second view of the same problem area
So the plan now is to find a local shop that can pull these parts back straight and get an estimate. Ill call around to a few shops tomorrow and check back in with any updates.