|
So i asked diode dynamics about the lowbeam power wire on there module and this is what i got
I apologize for the confusion but the low beam power wire will not run through the FRS always on module and should be completely separate. The Always on module will not affect the low beam application in any way. The best way to find the wire color for the low beam power would be to use a volt meter on the wires directly before the low beam headlight bulb itself!
So yeah im back to square one. If what he says is right...im about to just say screw it...guess my led fogs will just stay bright...i just dont see a wire anywhere around the headlight bulb housing
|