Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post

Agent_D · 05-01-2016, 08:57 PM

It was definitely modded by the previous owner. What it had done, I have no idea.

I'm using an Omni 3 bar map sensor with the settings I got from the forum:
Omni 3 Bar MAP Sensor (Metric in Bar)
0.617 - MULTIPLIER
0.03 - OFFSET
scaling limits 0 - 4.75v

I've used the stock MAP sensor with the basic ROM with the same results. I'll look at the port injectors to see what I notice. Are there any aftermarket/larger MAF sensors that may be causing an issue? It's hard to discern, since I don't have a stock BRZ to compare to.

05-01-2016, 08:57 PM	#6
Agent_D Senior Member Join Date: Feb 2016 Drives: 2013 Subaru BRZ Limited Location: Silver City, NM Posts: 258 Thanks: 12 Thanked 11 Times in 11 Posts Mentioned: 2 Post(s)	It was definitely modded by the previous owner. What it had done, I have no idea. I'm using an Omni 3 bar map sensor with the settings I got from the forum: Omni 3 Bar MAP Sensor (Metric in Bar) 0.617 - MULTIPLIER 0.03 - OFFSET scaling limits 0 - 4.75v I've used the stock MAP sensor with the basic ROM with the same results. I'll look at the port injectors to see what I notice. Are there any aftermarket/larger MAF sensors that may be causing an issue? It's hard to discern, since I don't have a stock BRZ to compare to.