What alignment and suspension settings do you run? Post em up. There are no wrong answers, this is just a place to share what you like and what you have learned.
For reference, here are the initial settings Tire Rack recommends:
Suggested Baseline Settings After Alignment
- Front Camber: -3.0 degrees (Confirm wheel and tire clearance near spring perch before driving, 3mm minimum clearance recommended.)
- Front Caster: 5.4 degrees(left)/5.5 degrees (right)
- Front Toe: Zero
- Rear Camber: -2.25 degrees
- Rear Toe: 1/8-inch total toe-in
- Tire Pressures: 35 psi all around (baseline, tune to surface and driver)
- Front and Rear Sway Bar: Set at outermost adjustment or softest setting
- Front Shocks: 1.0 turns (of 2.5 turns total available)
- Rear Shocks: 1.5 turns (of 2.5 total available)