[Target70]

Originally Posted by 86TOYO2k17

...EWCS 1/0 Gauge Premium Extra Flexible Welding Cable 600 Volt Combo Pack - Black+Red 15 Feet of Each - Made in the USA

Something like that should work.

Originally Posted by BlOody_BoOger

Since I plan on running twin phantoms I want to go back to having a full size batter in the car rather than the Odyssey. But the smaller batteries won't since I'll have to run four batteries. My plan is to have them in the trunk and run wire to the front. My question is. Would it be safe for me to use jumper cables wires?

Sent from my GM1915 using Tapatalk

I agree with 86TOYO. I have been running 2 dump packs with a trunk mounted starter battery since 2014. Photobucket has since made the pics blurry but the post is still up: http://www.ft86club.com/forums/showthread.php?t=69409

my battery mount wouldn't be track legal, but it does what I wanted it to while not damaging the stock interior.

I used 2ga welding wire from northern tool I think, very flexible and thick protective sheathing. I went kind of overboard with the double grounds. I eventually swapped out to an AGM battery when the factory starter batt died in late 2017, but otherwise I haven't had any problems. Still running on the original dump packs. I probably need to do another datalog run to see if I am still hitting the same boost levels.

I'll try to get good copies from photobucket if you want to see the pictures for ideas.