Will this fit? (width, offset and tire size Qs)

[RavSpec]

Originally Posted by OmarGC

I'm wondering if I'm going to need at least a 3mm spacer up front for the set I ordered from ya... Might end up buying some 5-10mm's for the rears, but kinda worried about maybe not clearing up front and having to scramble some up 3 days before an event.(when I hit us soil). If you ever get the chance to throw one up front in the sizing I ordered could you let me know how the clearance is? I'm sticking 245s up front aswell...

You should be good. Want me to test them ???

[OmarGC]

Originally Posted by RavSpec

You should be good. Want me to test them ???

Would be awesome if you could! BTW have they shipped out already? Sorry, I'm lost on my days working 14 hr days mostly at night... 7 hrs ahead of est.

[Slick]

Originally Posted by sweetfrs

they are going to be strictly for autocross

Are you looking to run cheaters? (Extreme Performance Street, i.e. 140 treadwear or higher)
or a true R-compound slick tire? (V710, Hoosiers, Hankook Z214)

Heard great things about the new BFG for Streets, but someone currently competing in autocross can probably suggest better tire choices.
(been away from autocross for a while, I used to run RA1 and Victoracers in my time...)

[t00n3wb]

Would this square set up fit nicely on eibach sport line springs? And what off set should be good?

18x9 Front and Rear.

[sweetfrs]

Originally Posted by Slick

Are you looking to run cheaters? (Extreme Performance Street, i.e. 140 treadwear or higher)
or a true R-compound slick tire? (V710, Hoosiers, Hankook Z214)

Heard great things about the new BFG for Streets, but someone currently competing in autocross can probably suggest better tire choices.
(been away from autocross for a while, I used to run RA1 and Victoracers in my time...)

Im not even sure probably cheaters, definetly not slicks lol

[ill86]

Originally Posted by t00n3wb

Would this square set up fit nicely on eibach sport line springs? And what off set should be good?

18x9 Front and Rear.

Need offset

[adprokid]

I got 18x9.5 +45 and coilovers, Will I be fine running 255/35/18 square ?

[vinnie86gt]

How would 18x8 +30 go all round? This would be on stock suspension and eventually lowered with the eibach 1" drop springs

Thanks guys

[white_knight]

Originally Posted by vinnie86gt

How would 18x8 +30 go all round? This would be on stock suspension and eventually lowered with the eibach 1" drop springs

Thanks guys

No problems with that setup. The rears will be tucked a bit.

[vinnie86gt]

Originally Posted by white_knight

No problems with that setup. The rears will be tucked a bit.

Thanks for that..

Ye i thought so but CST Hyper Zeros only come in 18x8 for 5x100pcd

I could put a 5mm spacer on the rear i guess.

The fronts shouldn't poke at all ye?

again thank you

[Killerbee]

Originally Posted by vinnie86gt

Thanks for that..

Ye i thought so but CST Hyper Zeros only come in 18x8 for 5x100pcd

I could put a 5mm spacer on the rear i guess.

The fronts shouldn't poke at all ye?

again thank you

Front should be about flush.

[GTS86]

Hi guys,

I'm looking at a set of 19x8 with an Offset/ET: - 50

It appears the rims have a negative offset, does that sound right? It seems like an extreme amount of negative offset. I'm guessing they won't fit an FRS/BRZ/86?

Would I be able to flush them to the fender with some spacers?

Thanks guys!!

[Slick]

Originally Posted by GTS86

Hi guys,

I'm looking at a set of 19x8 with an Offset/ET: - 50

It appears the rims have a negative offset, does that sound right? It seems like an extreme amount of negative offset. I'm guessing they won't fit an FRS/BRZ/86?

Would I be able to flush them to the fender with some spacers?

Thanks guys!!

They must be positive offset. But even a +50 will probably hit the struts on an 8" wide rim.
Spacers will help, but not ideal. Just look at getting correct offset wheels. On an 8 inch wheel, ideal offset would be +40 +\- 5mm in either direction.

[2point0]

Spacers would make that MORE negative. Only way to add offset (+) would be machining off some of the wheel's hub surface (if it can be done on that wheel) or I think if it's a 3pc wheel, you can swap the rims around and change the offset, but I've never dealt with those wheels and can't say for sure.