WHAT DID YOU DO TO YOUR FRS TODAY? - Page 1653 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Dadhawk · 05-31-2021, 03:08 PM

Quote:

Originally Posted by Stephen W.

. What's with that?

It happens because sunglasses are polarized vertically, but displays are usually polarized horizontally. The two basically block each other out.

You can see this for yourself with two sets of polarized glasses. Turn the lens 90 degrees to each other (hold one pair vertically) and you won't see anything. Turn them both horizontal (or the same direction) and you can see through them.

I've run into this with other types of displays as well, such as in aircraft or on a boat. The FAA recommends not wearing polarized lens when flying because of this. It can also cause issues seeing through some acrylics, like used in airplane windshields.

See page 4

https://www.faa.gov/pilots/safety/pi...sunglasses.pdf

soundman98 · 05-31-2021, 03:57 PM

My experience with polarized lenses is that a number of them are polarized in a random direction. One set of clipons, I had to tilt my head to the left, another set needed to be nearly upside down, and another needed to be tilted to the right

RToyo86 · 05-31-2021, 06:07 PM

The coating on my rexspeed polarized mirrors have failed. I don't really want to go back to normal mirrors now so I may give OLM a try next to see if i have better luck.

RickyBobby · 06-01-2021, 09:21 AM

Why I can not see the LCD screens on gas pumps and my bank's ATM when wearing my polarized sunglasses.
https://www.allaboutvision.com/sungl...d-lcd-screens/

Overdrive · 06-01-2021, 12:58 PM

Quote:

Originally Posted by soundman98

My experience with polarized lenses is that a number of them are polarized in a random direction. One set of clipons, I had to tilt my head to the left, another set needed to be nearly upside down, and another needed to be tilted to the right

They should (but not shall) be oriented horizontally to combat horizontal reflection of light off of surfaces. I've had some that are different and not quite level as well (usually something cheap in my experience), but most of the time they should be horizontally polarized. I get reminded once in a while when I rotate my phone to landscape for taking pictures and wonder why the hell the camera screen hasn't popped up yet.

Overdrive · 06-01-2021, 01:03 PM

Was yesterday, but got to go on track at Lime Rock Park for a few parade laps during the lunch break at the Trans Am race. We were told to keep it under 60, but also told to keep up with the pace car, and he apparently wanted to put his foot down on the main straight, so....officially we did not exceed 60mph lol. Always fun to get on a legit track, even if it's not in anger.

Grainy Sasquatch/UFO style photographic evidence to follow...

FLIPDADY · 06-01-2021, 02:59 PM

Slapped on the Greddy front lip and installed Philips PSX24 LED fogs

Sent from my LM-G900 using Tapatalk

bucketfoot · 06-01-2021, 09:11 PM

Camber plates, brake pads and high-temp fluid in preparation for my first day at the track in the 86

Silviacrazed · 06-01-2021, 11:16 PM

Put in a thermostatic sandwich plate and changed the oil.

Sent from my iPhone using Tapatalk

Cephas · 06-02-2021, 11:22 AM

Quote:

Originally Posted by FLIPDADY

Sorry if you've said elsewhere, but can you share your wheel/tire/suspension setup? Looks so perfect.

Grady · 06-02-2021, 06:13 PM

Quote:

Originally Posted by Silviacrazed

Put in a thermostatic sandwich plate and changed the oil.

Sent from my iPhone using Tapatalk

Keep an eye on those banjo fittings. I would drill holes in them and safety them!

Silviacrazed · 06-02-2021, 09:25 PM

Quote:

Originally Posted by Grady

Keep an eye on those banjo fittings. I would drill holes in them and safety them!

Did yours back out at some point?

Sent from my iPhone using Tapatalk

Grady · 06-02-2021, 09:47 PM

Quote:

Originally Posted by Silviacrazed

Did yours back out at some point?

Sent from my iPhone using Tapatalk

No I safetied mine when I installed it. But there have been reports of them coming loose. Also in aviation there is not a banjo fitting that is not safetied. look at the direction you torque the nuts in. As the engine flexes back and fourth it puts a strain on the hoses in the exact same axis as you loosing torque. If torque correct you will probably have no issues, it just is not worth the chance for me.

FLIPDADY · 06-02-2021, 10:05 PM

Quote:

Originally Posted by Cephas

Sorry if you've said elsewhere, but can you share your wheel/tire/suspension setup? Looks so perfect.

720Form GTF1's size 17x8 +35 wrapped in Hankook V12 evo2 235/45R17. Sachs dampers and Eibach Sportline springs

Sent from my LM-G900 using Tapatalk

05-31-2021, 03:57 PM	#23130
soundman98 ProCrastinationConsultant Join Date: Sep 2013 Drives: '14 Ranger, '18 Tacoma 4Dr LB Location: chicago-ish Posts: 11,327 Thanks: 35,240 Thanked 13,677 Times in 6,782 Posts Mentioned: 98 Post(s)	My experience with polarized lenses is that a number of them are polarized in a random direction. One set of clipons, I had to tilt my head to the left, another set needed to be nearly upside down, and another needed to be tilted to the right __________________ "The time you enjoy wasting is not wasted time"

06-01-2021, 01:03 PM	#23134
Overdrive Sittin' Sideways Join Date: Nov 2016 Drives: 2016 Toyota FR-S Location: United States Posts: 833 Thanks: 900 Thanked 533 Times in 344 Posts Mentioned: 9 Post(s)	Was yesterday, but got to go on track at Lime Rock Park for a few parade laps during the lunch break at the Trans Am race. We were told to keep it under 60, but also told to keep up with the pace car, and he apparently wanted to put his foot down on the main straight, so....officially we did not exceed 60mph lol. Always fun to get on a legit track, even if it's not in anger. Grainy Sasquatch/UFO style photographic evidence to follow... Attached Images __________________ -O/D 2016 FR-S, Hot Lava Last edited by Overdrive; 06-01-2021 at 03:37 PM. Reason: Attaching questionable evidence

06-01-2021, 09:11 PM	#23136
bucketfoot Senior Member Join Date: Mar 2021 Drives: 2020 Toyota GT86 Location: Colorado Posts: 170 Thanks: 30 Thanked 127 Times in 58 Posts Mentioned: 1 Post(s)	Camber plates, brake pads and high-temp fluid in preparation for my first day at the track in the 86 Attached Images __________________ This post sent using 100% recycled electrons.

06-01-2021, 11:16 PM	#23137
Silviacrazed Senior Member Join Date: Apr 2020 Drives: 2016 Scion FR-S Location: Glenmoore, PA Posts: 172 Thanks: 115 Thanked 169 Times in 84 Posts Mentioned: 0 Post(s)	WHAT DID YOU DO TO YOUR FRS TODAY? Put in a thermostatic sandwich plate and changed the oil. Sent from my iPhone using Tapatalk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Saw My First FR-S Today	Marrk	Scion FR-S / Toyota 86 GT86 General Forum	26	05-15-2013 01:40 PM
Got My Car Today!!!!! First 86!! #81	Juanito08	Scion FR-S / Toyota 86 GT86 General Forum	7	05-22-2012 05:54 PM
If my FRS was here already, today I would...	bestwheelbase	Scion FR-S / Toyota 86 GT86 General Forum	101	05-12-2012 07:20 PM
Sat in a FRS today!!	Ladnerd	Scion FR-S / Toyota 86 GT86 General Forum	12	04-30-2012 02:48 PM
Got my VIN today...	Enemies	BRZ First-Gen (2012+) — General Topics	63	04-12-2012 11:19 PM

05-31-2021, 06:07 PM	#23131
RToyo86 Senior Member Join Date: Mar 2018 Drives: 17 Asphalt 86 Location: Ottawa Posts: 2,421 Thanks: 1,907 Thanked 2,676 Times in 1,307 Posts Mentioned: 16 Post(s)	The coating on my rexspeed polarized mirrors have failed. I don't really want to go back to normal mirrors now so I may give OLM a try next to see if i have better luck.

06-01-2021, 09:21 AM	#23132
RickyBobby Senior Member Join Date: Jul 2014 Drives: 2013 Firestorm FR-S AT Location: Smokey Mountains Posts: 433 Thanks: 57 Thanked 294 Times in 156 Posts Mentioned: 3 Post(s)	Why I can not see the LCD screens on gas pumps and my bank's ATM when wearing my polarized sunglasses. https://www.allaboutvision.com/sungl...d-lcd-screens/

06-01-2021, 02:59 PM	#23135
FLIPDADY Member Join Date: Jan 2017 Drives: 2015 Subaru BRZ Sport Tech Location: Toronto Posts: 89 Thanks: 148 Thanked 80 Times in 36 Posts Mentioned: 1 Post(s)	Slapped on the Greddy front lip and installed Philips PSX24 LED fogs Sent from my LM-G900 using Tapatalk

User Name		Remember Me?
Password