MCA Suspension "Traction Mod" - Page 16 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

whataboutbob · 03-04-2024, 09:30 AM

Quote:

Originally Posted by norcalpb

Oh right, the gentle massaging haha. Is there any reason why the brace doesn't bolt up to the original trailing arm pickup point? Is the goal simply to keep the brace connected to where the trailing arm currently mounts with the traction mod?

With the traction mod in place, the distance between two mounting points is slightly different. The brace seemed to be designed to have a bit of room available _below_ where the normal trailing arm mount is located, but with the traction mod in place that area was occupied. I'll have to take a photo to illustrate, but I haven't gotten to do doing that yet.

Ohio Enthusiast · 03-04-2024, 12:22 PM

Well, my impatience got to me, I ordered the GP Sports mod from RHDJapan. I figured even if the new MCA mod is excellent, it'll probably be quite a bit more expensive (judging by the cost of the V1) and potentially difficult to source.

norcalpb · 03-04-2024, 03:41 PM

Quote:

Originally Posted by whataboutbob

With the traction mod in place, the distance between two mounting points is slightly different. The brace seemed to be designed to have a bit of room available _below_ where the normal trailing arm mount is located, but with the traction mod in place that area was occupied. I'll have to take a photo to illustrate, but I haven't gotten to do doing that yet.

Your description makes things a lot more clear! Sound like the BFH was the proper remedy.

Quote:

Originally Posted by Ohio Enthusiast

Well, my impatience got to me, I ordered the GP Sports mod from RHDJapan. I figured even if the new MCA mod is excellent, it'll probably be quite a bit more expensive (judging by the cost of the V1) and potentially difficult to source.

Very nice. You should consider getting the longer STi crossmember bolts as you’ll be removing the (most likely corroded) stock front subframe bolts to get the new piece in.

Subababarururu · 04-03-2024, 04:52 AM

Just ordered today; its back in stock

Now to figure out what I’m gonna do about ride height droop on stock 22 brz suspension (if it turns out as bad as some of y’all had noticed in your cars).

autoracer86 · 04-03-2024, 05:31 AM

Thanks for the heads up. I wonder what’s different about the new version

Racecomp Engineering · 04-03-2024, 10:09 AM

Quote:

Originally Posted by Subababarururu

Just ordered today; its back in stock

Now to figure out what I’m gonna do about ride height droop on stock 22 brz suspension (if it turns out as bad as some of y’all had noticed in your cars).

Please take a pic so we can see if it's updated or different at all!

- Andrew

whataboutbob · 04-03-2024, 10:14 AM

Quote:

Originally Posted by Subababarururu

Just ordered today; its back in stock

Now to figure out what I’m gonna do about ride height droop on stock 22 brz suspension (if it turns out as bad as some of y’all had noticed in your cars).

https://mcasuspension.com/gt86-and-brz-traction-mod/

dragoontwo · 04-03-2024, 11:39 AM

Quote:

Originally Posted by autoracer86

Thanks for the heads up. I wonder what’s different about the new version

Looks like they include a different subframe bolt and some bushings.

autoracer86 · 04-03-2024, 01:42 PM

Quote:

Originally Posted by dragoontwo

Looks like they include a different subframe bolt and some bushings.

I think I am going to order one. Install seems easier than when I did the subframe bushings lol.

M0nk3y · 04-03-2024, 03:26 PM

I ordered last night, will be sure to take photos but like others said looks like they revised the bushing slightly

StraightOuttaCanadaEh · 04-03-2024, 03:29 PM

Anyone running this mod with Racecomp T2 coilovers?

Racecomp Engineering · 04-03-2024, 03:46 PM

Quote:

Originally Posted by StraightOuttaCanadaEh

Anyone running this mod with Racecomp T2 coilovers?

I have the MCA traction mod on my personal car, with a sort of custom 5k/6k KW/ST 3 way coilovers. I think it would be great with our RCE T2s. It's a good mod.

- Andrew

StraightOuttaCanadaEh · 04-03-2024, 04:21 PM

Quote:

Originally Posted by Racecomp Engineering

I have the MCA traction mod on my personal car, with a sort of custom 5k/6k KW/ST 3 way coilovers. I think it would be great with our RCE T2s. It's a good mod.

- Andrew

Okay, I'm getting mine installed at the end of this month, maybe I should get this mod thing as well and do it at the same time.

RToyo86 · 04-04-2024, 12:50 PM

Been eye balling these forever and might pull the trigger now. Is there need for an alignment installing these? Having one done soon

Is there notable improvement to ride quality? primarily street driven in my yellow/B6 setup.

04-03-2024, 05:31 AM	#215
autoracer86 Senior Member Join Date: Jul 2022 Drives: Toyota GT86 Location: Ireland Posts: 577 Thanks: 513 Thanked 392 Times in 250 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Thanks for the heads up. I wonder what’s different about the new version __________________ SpareRoomRacing Youtube: https://www.youtube.com/@spareroomracing3168/featured Build Thread: https://www.ft86club.com/forums/showthread.php?t=153004

04-03-2024, 03:26 PM	#220
M0nk3y Senior Member Join Date: Oct 2016 Drives: 2016 Scion FRS / Chevy Colorado Location: Ohio Posts: 661 Thanks: 51 Thanked 566 Times in 316 Posts Mentioned: 10 Post(s) Tagged: 0 Thread(s)	I ordered last night, will be sure to take photos but like others said looks like they revised the bushing slightly __________________ Kyle H. - #89 STX

04-03-2024, 03:29 PM	#221
StraightOuttaCanadaEh Wes Join Date: Feb 2017 Drives: Artisan Spirits '17 86 Location: Toronto Posts: 2,826 Thanks: 1,198 Thanked 1,697 Times in 1,007 Posts Mentioned: 21 Post(s) Tagged: 0 Thread(s)	Anyone running this mod with Racecomp T2 coilovers? __________________ Instagram: @gt86ws

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Needed opinions: Does debadging "Subaru" and "BRZ" cheapen the car?	davidchoi	Cosmetic Modification (Interior/Exterior/Lighting)	49	11-22-2014 11:17 PM
"Clicking" or "knocking" caused by rear seat pull down lever.	husker741	Issues \| Warranty \| Recalls / TSB	6	11-27-2013 03:30 PM
"My Dealer told me {insert dumb idea}" (was "Toyota/Subary Partnership Cancelled?")	levifig	BRZ First-Gen (2012+) -- General Topics	48	08-09-2013 07:34 PM
Factory suspension "sticktion"	andrew20195	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	1	04-02-2013 03:49 PM
"Official" Suspension/Brake Thread	NYC BRZ	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	27	06-27-2012 10:14 PM

03-04-2024, 12:22 PM	#212
Ohio Enthusiast Senior Member Join Date: Apr 2020 Drives: 2018 BRZ Location: Dayton, OH Posts: 981 Thanks: 1,425 Thanked 835 Times in 478 Posts Mentioned: 13 Post(s) Tagged: 0 Thread(s)	Well, my impatience got to me, I ordered the GP Sports mod from RHDJapan. I figured even if the new MCA mod is excellent, it'll probably be quite a bit more expensive (judging by the cost of the V1) and potentially difficult to source.

04-03-2024, 04:52 AM	#214
Subababarururu Junior Member Join Date: Oct 2021 Drives: 2022 BRZ MT Ignition Red Location: PNW - USA Posts: 3 Thanks: 0 Thanked 5 Times in 3 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Just ordered today; its back in stock Now to figure out what I’m gonna do about ride height droop on stock 22 brz suspension (if it turns out as bad as some of y’all had noticed in your cars).

04-04-2024, 12:50 PM	#224
RToyo86 Senior Member Join Date: Mar 2018 Drives: 17 Asphalt 86 Location: Ottawa Posts: 2,274 Thanks: 1,811 Thanked 2,400 Times in 1,208 Posts Mentioned: 15 Post(s) Tagged: 0 Thread(s)	Been eye balling these forever and might pull the trigger now. Is there need for an alignment installing these? Having one done soon Is there notable improvement to ride quality? primarily street driven in my yellow/B6 setup.

User Name		Remember Me?
Password